4.2.6 View the System Information
This menu item is used to view the system information of the instrument.
The procedures to view the system information are as follows.
1. Press [Shift]+[Display] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select System Info and press
[Enter] key to make the parameter in modification.
The user can use left and right keys or knob to view the following system
information.
No.
Parameter
3
OVP Mode
4
OVP Level
OVP Delay
5
6
OCP Mode
7
OCP Level
OCP Dealy
8
9
OPP Mode
10
OPP Level
OPP Delay
11
System
View the system information.
Info
Model
Version
SN
Copyright © Itech Electronic Co., Ltd.
Default Value
Off
MAX
10.00 S
Off
MAX
10.00 S
Off
MAX
10.00 S
Display the instrument model.
Instrument version information.
Display the main firmware version.
Main
Display the communication board version.
Comm
Display the version of the control board for
Sub1
channel 1.
Display the version of the control board for
Sub2
channel 2.
Display the serial number.
Functions and Features
52
Need help?
Do you have a question about the IT-M3131D and is the answer not in the manual?