Protect Function Menu Reference - ITech IT-M3100D Series User Manual

System
Reset
System
Info

1.7.3 Protect Function Menu Reference

Press [Shift]+[Esc] (Protect) to enter into the protect menu interface.
Protect Protection function menu
U-Max
U-Min
OVP
OCP
OPP
Used to control the output state of the instrument. Channels
can be selected via submenus.
•
CH1: Select channel 1.
Sync In
•
CH2: Select channel 2.
When the pin inputs 0V low level, the On/Off light is off; when
the pin inputs 5V high level, the On/Off light is on.
Select whether to restore the factory default settings or not.
Don't restore the factory default settings.
NO
Restore the factory default settings.
YES
View the system information.
Display the instrument model.
Model
Display the control board version.
Ver
Display the communication board version.
CommVer
SN Display the serial number.
Last Cal Display last calibration date.
The maximum output voltage setting value.
The minimum output voltage setting value
Over-voltage protection.
Off
On
Over-current protection.
Off
On
Over-power protection.
Copyright © Itech Electronic Co., Ltd.
Turn the OVP function off.
Turn the OVP function on.
Over-voltage limit.
Level
Delay Delay time.
Turn the OCP function off.
Turn the OCP function on.
Level Over-current limit.
Delay Delay time.
Quick Reference
13