Removing The Varistor - Fronius Trans Pocket 1500 Service Instructions Manual

Removing the
varistor
Fig.3
Fig.4
- Completely remove the solder from the soldering points (76), using a solder
- Using a pair of pointed pliers, carefully detach the varistor (2) from the LCA 15 board
(76)
Note! Never use force to detach the varistor (2) from the LCA 15 board. Before
any work involving the soldering iron, always clean the tip of the soldering iron.
absorption strand or suction pump
- Unplug the mains-cable earthing
conductor (74)
- Unplug the heat-sink earthing
conductor (75)
(75) (74)
Fig.5
75
(2)