Fronius Trans Pocket 1500 Service Instructions Manual page 222

Removing the
FPA15 board
(continued)
(66)
Fig.5
Fig.6
Fig.7
Fig.9
Removing the
seal for the
remote-control
unit connection
socket
(7)
Fig.10
(69) (70)
Fig.8
108
- Undo and remove the round nut (66)
- Undo the M5x12 - TX20 screw (68) on
the copper bracket (55)
(68)
(55)
- TP 1500 TIG: Loosen the hexagon nut
(69) (width-across=13) for the screw-
fixing of the
- TP 1500 / 1500 RC: In the
loosen the M5x12 (TX20) screw (70)
- Swing the copper bracket (55) to one
side
Note! First carefully detach the
FPA15 board (5) from the front
alignment pins.
(5)
- Carefully lift the FPA15 board (5) and
remove it
(71)
(55)
- Carefully pull the seal (7) for the
remote-control unit connection socket
out of the front of the housing
socket
socket,