Removing The Welding Sockets; Removing The Front Of The Housing - Fronius Trans Pocket 1500 Service Instructions Manual

Removing the
welding sockets
Fig.11
Fig.12
(13)
Fig.13
Removing the
front of the
housing
Fig.15
(14) (70) (14) (14)
TP 1500 TIG TP 1500 / TP 1500 RC
Fig.14
(92)
- TP 1500 TIG: Open the hose clamp
(18) and take out the gas hose (17)
(18)
(17)
- TP 1500 TIG: Loosen the hexagon nut
(69)
(69) (width-across=13) for the screw-
fixing of the
- TP 1500 TIG: In the
the M5x12 (TX20) screw (70)
- TP 1500 / TP 1500 RC: In the
socket and in the
M5x12 (TX20) screw (70)
- Working from the inside of the housing
towards the outside, push the welding
(70) (14)
sockets (13) or (14) out of the front of
the housing
- Undo the 5x10 - TX20 screw on the
floor of the housing
109
socket
socket, loosen
socket, loosen the