Maintenance And Repair Work - Fronius Trans Pocket 1500 Service Instructions Manual

Maintenance and repair work

Installation On the following pages, you will find installation instructions for the most important
instructions assemblies in the TP 1500 power source.
The following list comprises all the installation instructions. For each set of installation
instructions, the item numbers of the assemblies covered in this particular set of
instructions are also given.
- Installation instructions "LCG15 board and secondary diode"
- Installation instructions "LCA15 board"
- Installation instructions "FPA 15 board"
- Installation instructions "Varistor"
- Installation instructions "Transformer"
- Installation instructions "Temperature sensor"
- Installation instructions "Fan"
- Installation instructions "Mains switch and mains cable"
- Installation instructions "Gas solenoid valve"
- Installation instructions: Potentiometer, connection socket + seal for remote control
- Installation instructions: Front of housing, with adhesive label and welding sockets
Assembly: (3), (4)
Assembly: (1)
Assembly: (5)
Assembly: (2)
Assembly: (8)
Assembly: (9)
Assembly: (10)
Assembly: (11), (12)
Assembly: (16)
unit
Assembly: (7), (29), (30)
Assembly: (13), (14), (23), (26), (27), (28)
52