Removing The Rechargeable Battery Pack - Fronius AccuPocket 150/400 TIG Operating Instructions Manual

Removing the re-
NOTE!
chargeable bat-
The following steps on removing the rechargeable battery pack must only be
tery pack
used when disposing of the device!
▶
NOTE!
Before removing the rechargeable battery pack, the power source must be dis-
connected from the battery charger!
▶
1
Remove the control panel
3
Remove 2 TX25 screws, remove device feet at
the front
58
If the rechargeable battery pack needs to be repaired or replaced, contact
After-Sales Service.
Ensure that the power source is completely discharged.
1
2
1
2
2
2
2
Disconnect the (+) power cable from the re-
chargeable battery pack, remove 2 TX25 screws
4
2
Remove 2 TX25 screws, remove the cover