Removing the
Laser Optics
If dropped, the laser optics unit can be damaged to such an extent that it is
rendered unusable.
▶
Installing the
laser optics
If dropped, the laser optics unit can be damaged to such an extent that it is
rendered unusable.
▶
3
4
3
CAUTION!
Remove and handle the laser optics carefully.
4
4
CAUTION!
Insert and handle laser optics carefully.
Loosen the Allen screws
1
M5 x 20 mm, size 4 mm
Do not remove the screws.
It must be possible to move the clamp.
Loosen the Allen screws
2
M5 x 25 mm, size 4 mm
Remove the screws
3
Remove the bracket
4
Remove the Allen screws
5
M5 x 20 mm, size 4 mm
The screws are needed again when
the new laser optics unit is installed.
Remove laser optics from the laser
6
welding head
5
89