Fronius Trans Pocket 1500 Service Instructions Manual page 179

Fitting the LCA15
board
(continued)
Fig.11
- Arrange the "LCA15 board transformer leads" (44) in such a way that the WAGO
All parts must be kept clean! Any contamination between the transistor module and the
heat sink will impair the heat-transfer.
Fig.12
connectors (45) are resting on the transformer coil body, as shown in Fig.11
Note! When fitting the LCA15 board in place, make sure that the "LCA15 board
transformer leads" (44) are not trapped between the transistor module and the
heat sink.
(44)
(45)
Note! When fitting the LCA15
board in place, make sure that
the air-guide film (49) is arranged
as shown in Fig. 12.
(49)
65