Closing The Housing - Fronius Trans Pocket 1500 Service Instructions Manual

Closing the
housing
Fig.6
(34)
Fig.7
(21) (37)
(36)
(35)
- Insert the board insulator (37)
- Insert the housing stiffening element
(21)
- Plug the "housing earth conductor"
(36) onto the housing box, in the
correct position
- Replace the housing box
- Screw the 5x25-TX20 screw (35) back
onto the rear of the housing
- Screw the 5x25-TX20 screw (34) back
onto the front of the housing
- Fit the carrying strap back on again
87