Table of Contents
Advertisement
5.0 Chapter 5.
Upgrading the 7131 SCSI Multi-Storage Tower
This chapter describes the instructions for upgrading your 7131 Storage Tower.
Handling ESD sensitive parts
Setting addresses and connecting SCSI cables
Removing a device from a media bay
Installing a device in a media bay
Removing a device from a hot-swap bay
Installing a device in a hot-swap bay
Refer to your system publications to prepare the system for device removal or replacement.
For all manual-plug devices listed in Table 5-1 follow the instructions in "Removing and Installing Devices in the Media Bays" in topic 5.3.
+--------------------------------------------------------------------+
¦ Table
5-1. Media Bay Options
+--------------------------------------------------------------------¦
¦ Feature
¦ Media
+-----------+-------------------------------------------+------------¦
¦ 3034
¦ Manual-Plug hard disk drive (1)
+-----------+-------------------------------------------+------------¦
¦ 3033
¦ Manual-Plug hard disk drive
+-----------+-------------------------------------------+------------¦
¦ 3032
¦ Manual-Plug hard disk drive
+-----------+-------------------------------------------+------------¦
¦ 6142
¦ Manual-Plug 4 mm tape drive
+-----------+-------------------------------------------+------------¦
¦ 6147
¦ Manual-Plug 8 mm tape drive
+-----------+-------------------------------------------+------------¦
¦ 2616
¦ Manual-Plug CD-ROM drive
+--------------------------------------------------------------------¦
¦ Note:
¦
¦ 1.
If the 4.5GB hard disk drive is installed with any other media ¦
¦
bay feature, it is recommend that you install the 4.5GB hard
¦
disk drive in the lower (address 5) media bay for better
¦
cooling.
+--------------------------------------------------------------------+
For all hot-swap hard disk drives listed in Table 5-2 follow the instructions in "Removing and Installing Hot-Swap Hard Disk Drives" in topic
5.4, for removing and installing devices in the hot-swap bays. These devices are plugged into the backplane of the 7131 Storage Tower.
+-----------------------------------------------------------+
¦ Table
5-2. Hot-Swap Hard Disk Drive Options
+-----------------------------------------------------------¦
¦ Feature
¦ Hot-Swap Hard Disk Drive
+-----------+----------------------------------+------------¦
¦ 3084
¦ Hot-Swap Hard Disk Drive
+-----------+----------------------------------+------------¦
¦ 3083
¦ Hot-Swap Hard Disk Drive
+-----------+----------------------------------+------------¦
¦ 3082
¦ Hot-Swap Hard Disk Drive
+-----------------------------------------------------------+
Subtopics
5.1 Handling Electrostatic Discharge-Sensitive Parts
5.2 Setting Addresses and Connecting SCSI Cables
5.3 Removing and Installing Devices in the Media Bays
5.4 Removing and Installing Hot-Swap Hard Disk Drives
7131-105 User's Guide
Chapter 5. Upgrading the 7131 SCSI Multi-Storage Tower
¦ Capacity
¦ 4.5GB
¦ 2.2GB
¦ 1.1GB
¦ Copyright IBM Corp. 1995, 1996
5.0 - 1
¦
¦ Capacity
¦
¦ 4.5GB
¦
¦ 2.2GB
¦
¦ 1.1GB
¦
¦ 4.0GB
¦
¦ 5.0GB
¦
¦ 600MB
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
Advertisement
Table of Contents
