Electrostatic Discharge (ESD)
Attention:
When you handle field-replaceable units (FRUs) and other computer parts, take
these precautions to avoid static damage:
v Limit your movement. Movement can cause static electricity to build up
around you.
v Always touch computer parts carefully. Hold adapters and memory-modules
by their edges. Never touch any exposed circuits.
v Prevent people who are not correctly grounded from touching computer parts.
v Before you install a new part, touch the static-protective package that contains
the part against an unpainted metal part of the 2104 or using system for at
least two seconds. This action reduces static electricity in the package and in
your body.
v Remove the part from its package and, if possible, install it directly into the
2104 without putting the part down. If you need to put the part down, first
place the static-protective package that contained the part onto a smooth, level
surface, then place the part onto the package. Do not place the part onto any
metal surface.
xi