Scanning Bar Codes
SR61T Tethered Scanner User's Guide
For the SR61TL, SR61TXR, SR61THP and SR61T2D do not look
directly into the window area or at a reflection of the laser beam
or laser aiming beam while scanning. Long-term exposure to the
laser beam can damage your vision.
The SR61T contains either a 1D linear imager (SR61T1D), 2D area
imager (SR61T2D or SR61THP), laser scan engine (SR61TL), or near-
far range area imager (SR61TXR) to scan bar code data. The type of
scan engine you are using and the type of bar code you are decoding
determines the way you scan the bar code.
When you unpack the SR61T, these bar code symbologies are enabled:
•
Code 39
•
Code 128 / GS1-128
•
EAN/UPC
PDF417 (SR61TL, SR61T2D, SR61THP and SR61TXR only)
•
•
DataMatrix (SR61T2D, SR61THP and SR61TXR only)
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on your SR61T. Use
EasySet version 5.6.4.0 or later to enable and disable symbologies for
your scanner. EasySet is available on the Intermec web site at
www.intermec.com/EasySet.
Chapter 2 — Scanning With the SR61T
13