Chapter 2 — Scanning With the SR61T
Scanning Bar Codes
16
For the SR61TL, SR61TXR, SR61T2D, SR61THP, and SR61TDPM
do not look directly into the window area or at a reflection of the
laser beam or laser aiming beam while scanning. Long-term
exposure to the laser beam can damage your vision.
The SR61T contains either a 1D linear imager (SR61T1D), 2D area
imager (SR61T2D, SR61THP or SR61TDPM), laser scan engine
(SR61TL), or near-far range area imager (SR61TXR) to scan bar code
data. The type of scan engine you are using and the type of bar code
you are decoding determines the way you scan the bar code.
When you unpack the SR61T, these bar code symbologies are enabled:
•
Code 39
Code 128 / GS1-128
•
•
EAN/UPC
•
PDF417 (SR61TL, SR61T2D, SR61THP, SR61TDPM and
SR61TXR only)
•
DataMatrix (SR61T2D, SR61THP, SR61TDPM and SR61TXR
only)
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on your SR61T. Use
EasySet version 5.6.4.0 or later to enable and disable symbologies for
your scanner. EasySet is available on the Intermec web site at
www.intermec.com/EasySet.
SR61T Tethered Scanner User's Guide