Figure 2-9 "Send To Printer" Window; Save Defaults To Printer - Intermec 6820 Technical Reference Manual

Using the Configuration Tool SECTION 2
Figure 2-9
"Send To Printer" Window
The screen in Figure 2-9 displays the progress made while updating the printer's
configuration. Upon completion of this operation, the Total Transfer bar reaches
100%, and you are returned to the Main Menu dialog window.

Save Defaults to Printer

Press the Save to Printer button, on the Main Menu dialog window, to load the
default configuration file, DEFAULT.PCF, and save it to the printer. This
combines the operations of the [from file], the selection of the DEFAULT.PCF file,
and the [to printer] into a single button. The following message appears stating
that the working configuration will be overwritten.
Press the Cancel to return to the Main Menu dialog window without loading the
default configuration file.
If you press the OK button, and if the default configuration file is NOT
successfully loaded into the working configuration (i.e. the DEFAULT.PCF file is
missing), then the following error message appears:
2-16 6820 Printer Technical Reference