Removing Pc Cards; Figure 2-8 Removing Pc Card End Cap - Intermec 6100 User Manual

Operation
5. Reinstall the endcap by slipping the end opposite the
1. End cap shoulder bolt (counterclockwise to unlock, clockwise to lock)

Removing PC Cards

The PC card compartment contains ejector buttons for re-
moving the cards from the slots (refer to Figure 2-9 on page
2-17 for location).
Press in on the ejector button to release and eject the card.
The button will eject the card far enough so you can pull it
the rest of the way with your fingers.
2-16 6100 Hand-Held Computer User's Guide
lock knob over the stay inside the compartment and
then screwing the shoulder bolt clockwise to lock it.
Figure 2-8
Removing PC Card End Cap
SECTION 2
1