Reset The Computer; Figure 3-1 Ballpoint Pen In 6200 Reset Switch - Intermec 6200 Troubleshooting Manual

Reset the Computer

B
CAUTION: Do NOT use a lead pencil on the reset switch.
To reset the computer, do the following:
1.
2.
Open the backup battery compartment and remove any PC Cards
from the computer.
Gently press the reset switch inside the backup battery compartment,
using a ballpoint pen.
4
1. Backup battery compartment door
2. Reset switch
3. Top of computer
4. Ballpoint pen
Figure 3-1
Ballpoint Pen in 6200 Reset Switch
6200 and 6210 Hand-Held Computers Troubleshooting Guide 3-3
SECTION 3 Flash
"
1
2
3