Handstrap Replacement; Figure 3-1 Replacing The Handstrap - Intermec 6212 User Manual

Hand-held computer

Hide thumbs Also See for 6212:

Table of Contents

Routine Care and Maintenance

Handstrap Replacement

To replace the handstrap follow these steps.

1. Remove the top and bottom screws holding the hands-

2. Position the Battery Compartment latch knob in the

3. Lift the handstrap off and replace with a new one.

3-2

6212 Hand-Held Computer User's Guide

trap in place.

unlock position.

1. Screws holding handstrap

2. Battery compartment latch knob

Replacing The Handstrap

Figure 3-1

SECTION 3

Table of Contents