4) Close the two clips at the leg straps (see Fig. 43, item 1).
5) If needed: Tighten the belt straps in the clip buckles at the back of the seat and fasten them (see Fig. 42, item
1).
6) By pulling on the free belt ends in the belt adjustment, the length of the leg straps can be adjusted, if needed
(see Fig. 43, item 2).
41
43
6.3.3.7 Neck support
The shaped padding helps to immobilise the user's head in the seating unit.
The option has already been installed by qualified personnel.
44
6.3.3.8 Lumbar padding
The shaped padding offers additional support for the lumbar spine.
The option has been positioned and fastened below the seat padding by qualified personnel.
Kimba Neo
42
45
Use
Ottobock | 21