Armrests - Otto Bock Kimba Neo Instructions For Use Manual

Use
64
66
Removing and cleaning the incontinence cover
1) Remove the seat padding and the back padding from the seating unit (see Page 31 et seq.).
2) Remove the incontinence cover from the seat padding and lay it down.
3) Remove the incontinence cover from the back padding. To do this, open all the hook-and-loop straps and
remove the incontinence cover from the back padding.
4) Wash the incontinence cover according to the washing symbols on the label with care instructions.
INFORMATION: Fully close the hook-and-loop straps before washing.

6.3.11 Armrests

CAUTION
Improper lifting by attendants
User may fall or tip over
► The armrests must not be used to lift the seating unit or the entire rehab buggy.
INFORMATION
Please note that the armrests cannot be combined with the options "grab rail" or "tray", as the same mounts are
used.
The rehab buggy can be equipped with armrests that support the arms for certain indications.
The removable armrests have been attached to the seating unit and secured against rotation.
Removing/mounting the armrests
1) Press in the tripod spring (see Fig. 69).
2) Pull the armrest up and out or insert the armrest into the adapter.
28 | Ottobock
65
67
Kimba Neo