Basic Functions Of The Kimba Neo Seating Unit; Removing And Mounting The Seating Unit - Otto Bock Kimba Neo Instructions For Use Manual

Use
CAUTION
Failure to check for proper functioning
Falling, tipping over of the user due to lack of maintenance
► In the interest of the user's safety, check the product for correct function before each use.
► Please also read the instructions in the section "Maintenance" > "Maintenance intervals".
INFORMATION
Please also observe the safety instructions in the section "Safety" > "Safety instructions for use".
In the interest of user safety, the following inspection must be conducted prior to use:
1) Verify firm locking of the seat and back angle adjustment mechanism.
2) Verify the functionality of all belt buckles on the safety belts and/or positioning aids.

6.2 Basic functions of the Kimba Neo seating unit

INFORMATION
Adjusting the seat and back angle is not possible in combination with the Kimba Cross and Kimba Inline mobility
bases.

6.2.1 Removing and mounting the seating unit

CAUTION
Incorrect mounting of the seating unit
Falling out of the user if the seating unit is not secured
► Secure the seating unit using the seat lock.
► When attaching the seating unit, make sure you hear it engage into the mobility base.
To facilitate transportation of the rehab buggy in a passenger vehicle or to divide the weight into two units for lift­
ing, the seating unit can be easily detached from and reattached to the outdoor mobility base.
Detaching the seating unit
1) Slide the seat lock to the right to open it (see Fig. 6).
2) Stand next to the seating unit and hold the seat by the top of the backrest with one hand.
3) Pull the release lever located under the seat up to the edge of the seat (see Fig. 7).
→ The clutch will now release the seat adapter.
4) Tip the seat back at an angle of approx. 45° and then lift it up (see Fig. 3).
6
10 | Ottobock
7
Kimba Neo