Technical Data
4 Technical Data
4.1 Dimensions
Length
Width
Height
4.2 Mass
Total weight
5 Assembly
5.1 Mounting on the SIT-Cast Casting Device
5.2 Frontal Support Replacement and Installation
1
2
24 | Ottobock
444 mm / 17 1/2"
140 mm / 5 1/2"
181 mm / 7 1/8"
2.5 kg / 5.5 lbs
The 743Y50 Anatomical SIT-Cast is mounted on the
743G10 Pneumatic SIT-Cast Casting Device or the
743G1 SIT-Cast Casting Device.
Firmly tighten the knurled screws.
Assignment of the frontal supports to the amputated
side:
1. Frontal support with amputation on the right
2. Frontal support with amputation on the left
To change the frontal support, remove the knurled
screw and replace the frontal support.
Firmly tighten the knurled screws after reassembly.
743Y50 Anatomical SIT-Cast