Liability; Ce Conformity; Warranty; Trademarks - Otto Bock Kimba Neo Instructions For Use Manual

9.2 Liability

The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorised modification of the product.

9.3 CE Conformity

This product meets the requirements of the European Directive 93 / 42 / EEC for medical devices. This product has
been classified as a class I device according to the classification criteria outlined in Annex IX of the directive. The
declaration of conformity was therefore created by the manufacturer with sole responsibility according to Annex VII
of the directive.

9.4 Warranty

Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).

9.5 Trademarks

All product names mentioned in this document are subject without restriction to the respective applicable trade­
mark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of the respective
owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justify the conclusion
that the denotation in question is free of third-party rights.

10 Technical data

Kimba Neo seating unit
Seat width
Seat depth
Backrest height
Backrest angle
Height of shoulder strap slots (min./max.)
Width of shoulder strap slots
Lower leg length
1)
Max. load capacity
Max. load capacity for use in a wheelchair accessible
3)
vehicle
Weight
Folded size with lateral supports (LxWxH)
1)
The load capacity differs between the Kimba outdoor mobility base and the seating unit:
• Seating unit (max. 40 kg) + own weight of the seating unit, size 1 (7.5 kg) = 47.5 kg
• Outdoor mobility base (max. 55 kg) – fully loaded seating unit (47.5 kg) = 7.5 kg for other accessories + weight
in storage bag
2)
Possible with seat depth reducer option from140 mm.
3)
Observe the information in the section "Use in a wheelchair accessible vehicle".
Kimba Neo
Size 1
200 – 300
2)
190 – 310
410 – 610
80° – 180°
300/450
50
190 – 310
40
40
7
580x370x420
Technical data
Size 2
260 – 350
240 – 400
560 – 700
80° – 180°
300/450
50
200 – 370
40
40
8.5
590x430x580
Ottobock | 35