Care; Detaching/Attaching The Padding For Cleaning; Detaching/Attaching The Seat Padding; Detaching/Attaching The Back Padding - Otto Bock Kimba Neo Instructions For Use Manual

• Adjusting and securing the back angle
• Securing the product in the vehicle
• Securing the user in the product

6.6 Care

• Do not allow sand or other particles to get into the product. They could degrade the wheel bearings and the
locking mechanism.
• Use in saltwater is not permitted.

6.6.1 Detaching/attaching the padding for cleaning

The padding can be removed for care and maintenance of the product.

6.6.1.1 Detaching/attaching the seat padding

1) Lift the seat padding and remove it from the hook-and-loop fastener on the seat plate (see Fig. 70).
2) Clean the seat padding.
3) Fit the seat padding onto the hook-and-loop fastener.
4) Push the seat padding under the hip supports (see Fig. 71).
70

6.6.2 Detaching/attaching the back padding

INFORMATION
The manufacturer offers two versions of the back padding:
► Back padding for standard back insert (see Fig. 72)
► Back padding for back insert with headrests (see Fig. 73)
1) Release the twist lock of the back padding behind the seat bottom (see Fig. 74).
2) Unzip the back padding zipper (see Fig. 75) and remove/clean the back padding.
3) Put the back padding in place and pull it through between the back and seat bottom.
4) Close the twist lock (see Fig. 74).
5) Slide the back padding under the lateral supports (no illustration).
72
Kimba Neo
71
73
Use
Ottobock | 31