Removing The "Padded" Armrest - Otto Bock VENTUS Instructions For Use Manual

1) Pull the side panels up out of the guides of the side panel supports (see fig. 20).
2) Fold the side panels up by 90° (see fig. 21).
3) After getting in, fold the side panels down again into the guides of the side panel supports.
20
Folding for transport (example: "standard" side panel)
The side panels can be folded in for transport.
1) Fold the side panels up out of the side panel supports (see fig. 22).
2) Fold the side panels inwards by 90° (see fig. 23).
3) After assembling the wheelchair, fold the side panels down again into the guides of the side panel supports.
22

6.6.3 Removing the "padded" armrest

To make getting in and transporting the wheelchair easier, the armrests can be folded away or removed.
1) Pull the armrests up out of the holders (see fig. 24).
2) Fold the armrests away by 90° (see fig. 25) or remove them.
3) After getting in, slide the armrests down into the holders again.
24
Ventus
21
23
25
Use
Ottobock | 17