Adjusting The Height Of The Forearm Support; Removing The Side Panels; Adjusting An Arm Support With Swivel Unit - Otto Bock Avantgarde XXL 2 Instructions For Use Manual

Use
17
19

7.6.1 Adjusting the height of the forearm support

Side panel with height-adjustable forearm support
1) Pull up the release lever under the arm support (see fig. 19, item 1).
2) Slide the forearm support to the desired position.
3) Let go of the release button. The forearm support locks into place automatically.

7.6.2 Removing the side panels

INFORMATION
Side panels with permanent screw connections cannot be removed.
For easier entry and transport, the side panel with height-adjustable forearm support can be removed.
Removal
1) Push the release lever forward (see fig. 19, item 2).
2) Fold back the side panel.
3) In the vertical position, pull the side panel up and off.
Attachment
1) Insert the side panel into the holder.
2) Fold the side panel forwards. The locking mechanism engages automatically.

7.6.3 Adjusting an arm support with swivel unit

INFORMATION
After adjusting the swivel unit, please always make sure that the lock pins have safely snapped in place.
The swivel unit allows the support angle and the rotation setting of an arm support to be adjusted individually.
Adjusting the support angle
1) Pull the release button outwards (see fig. 20, item 1).
2) Lift up the arm support at the front end and adjust it to the desired angle (see fig. 20, item 2).
18
18
Avantgarde XXL 2