Adjusting The Side Panels; Legrests; Removing/Installing The Leg Supports - Otto Bock Skippi Plus Instructions For Use Manual

8.2.2 Adjusting the side panels

The height and depth of the armrests can be adapted to the requirements of the user.
10
11

8.3 Legrests

The legrests support the user's feet.
The height of the legrests has been adjusted by qualified personnel to the length of the user's lower leg.
The angle of the footrest has been set by the qualified personnel so that it allows the ankles to rest in a comfortable
position.

8.3.1 Removing/installing the leg supports

CAUTION
Incorrect handling when getting in
Crushing, pinching, impacts due to incorrect handling
► Do not reach into the danger area with your fingers when folding the legrest or footplates up or down.
► Never step on the footplates when getting in and out.
► Note projecting edges.
INFORMATION
For detaching/attaching the mechanically elevating leg supports: Manually elevating legrests.
Skippi Plus
Adjusting the armrest height
1) Loosen the Allen head screw on the side panel
mounting.
2) Slide the armrests up or down to the desired posi­
tion.
3) Re-tighten the Allen head screw.
Adjusting the armrest to the forearm length
1) Loosen the 2 set screws on the bottom of the arm­
rest.
INFORMATION: 3 set screws need to be
loosened on the control panel side.
2) Push the armrest to the front or back into the
desired position.
3) Tighten the set screws.
Use
21