Removing And Attaching The Leg Supports - Otto Bock Motus CV Instructions For Use Manual

Use
11

7.3.1 Removing and attaching the leg supports

The leg supports on the Motus CV can be detached to make it easier for the user to get in and out.
Detaching the "segmented, angle-adjustable" leg support
1) Fold the foot plate up (see fig. 13).
2) Pull back the release lever (see fig. 14).
3) Fold the leg support out by 90° and detach it (see fig. 15, item 1). Now the leg support can be lifted up and off.
Attaching the "segmented, angle-adjustable" leg support
1) Hold the leg support 90° out to the side and insert it into the leg support mounting (see fig. 16).
2) Swing the leg support into the direction of travel until it engages.
3) Fold the foot plate down.
13
15
Detaching the "elevating" leg support/amputation leg support
1) Activate and hold the release lever (see fig. 17, item 1).
2) Pull the leg support up to detach it (see fig. 18).
16
12
14
16
Motus CV, Motus CS