Otto Bock DynamicArm Plus Instructions For Use Manual page 59

Prog Activation
INFORMATION
The level of the switch voltage can be reduced with the boost setting.
Control selection of the electric wrist rotator
Prog Activation
6 Double channel con­
trol with one elec­
trode
Supination
Strong signal that begins quickly
After exceeding the ON threshold, the upper switching
threshold must be reached within 80 ms. The level of
the ON threshold and the upper switching threshold
can be changed manually.
Prog Activation
7 With two electrodes
Prog Activation
8 Acceleration with two
electrodes
DynamicArm Plus 12K110N=*
Control
Control
Two different control com­
mands are generated
pronation and supination.
The speed is proportional to
the control signal.
Control
The control commands for
supination and pronation are
generated by two electrodes.
The speed is proportional to
the control signal.
Control
The longer the control signal
is held, the more the electric
wrist rotator accelerates.
Version
Version
Channel 3 or 4
for (purple or orange
marking)
Pronation
Signal that begins slowly.
The ON threshold is exceeded, but remains below the
upper switching threshold for 80 ms. The level of the
ON threshold and the upper switching threshold can be
changed manually.
Version
Channel 3 or 4
(purple or orange
marking)
Version
Channel 3 or 4
(purple or orange
marking)
Handling
Switching mode
• Extension: channel
(brown marking)
The product accelerates
quickly up to the maximum
speed, strong switch sig­
nal
Switching mode
• Pronation: signal
begins slowly
• Supination: strong signal
that begins quickly
Switching mode
• Pronation: triggering with
channel 3 (purple mark­
ing)
• Supination: triggering
with channel 4 (orange
marking)
Switching mode
•
6
that
59