Otto Bock DynamicArm Plus Instructions For Use Manual page 46

Preparing the product for use
For forearm lengths from 225 mm to 213 mm with 10S17 electric wrist rotator
For forearm lengths from 225 mm to 187 mm without 10S17 electric wrist rotator
46
► Make sure the 10S17 electric wrist rotator dummy
is pushed over the cable protector cap. This
ensures correct axial alignment of the lamination
ring.
1) Pull the 10S17 electric wrist rotator dummy back
and out of the lamination ring. The lamination ring
cover has to remain in the lamination ring.
2) Pull out the 10S17 electric wrist rotator dummy with
the lamination ring cover by the socket head screw.
3) Or, pull out the lamination ring cover on its own.
DynamicArm Plus 12K110N=*