Otto Bock DynamicArm Plus Instructions For Use Manual page 44

Preparing the product for use
6.3 Gluing in the lamination ring with quick-disconnect wrist unit
1. Lamination cover
2. Lamination ring
3. Socket head screw
4. Dummy for electric wrist rotator
44
2) Cut the forearm using a vibrating saw.
3) Sand all sides of the cut edge at a right angle.
Deburr inner and outer sanded edges. Round the
inside edge slightly.
4) Use the hook to remove the foam cover.
DynamicArm Plus 12K110N=*