Replacing The Armrest; Replacing The Clothing Protector - Otto Bock 490E75 Series Service Manual

4.15.5

Replacing the armrest

Tools: Allen wrench size 3; torque wrench with Allen insert size 3
Removing the armrest
1) Optional: Remove the control panel with swivel arm (see Page 32).
2) Pull the side panel up and out of the side panel holder. To do so, loosen the thumb screw on the side panel holder
(see Fig. 214/215, item 1).
3) Loosen the 2 set screws on the bottom of the armrest (see Fig. 233, item 1).
4) Slide the armrest down and off the side panel.
Attaching the armrest
1) Slide the armrest onto the side panel and into the desired position.
2) Firmly tighten the 2 set screws on the bottom of the armrest (see Fig. 233, item 1).
3)
holder (see Fig. 214/215, item 1).
4) Optional: Install the control panel with swivel arm (see Page 32).
233
4.15.6

Replacing the clothing protector

Tools: Allen wrench size 3; torque wrench with Allen insert size 3
Removing the clothing protector
1) Pull the side panel up and out of the side panel holder. To do so, loosen the thumb screw on the side panel holder
(see Fig. 214/215, item 1).
2) Loosen and remove the 2 screws on the clothing protector (see Fig. 234, item 1).
3) Remove the clothing protector from the side panel (see Fig. 234, item 2).
Attaching the clothing protector
1) Position the clothing protector on the side panel (see Fig. 234, item 2).
2)
3)
holder (see Fig. 214/215, item 1).
234
490E75=0_C
Service work
Ottobock | 109