Replacing The Rear Cover - Otto Bock 490E75 Series Service Manual

4.6.3

Replacing the rear cover

Prerequisites:
Optional: Move the seat to the lowest seat height (see Page 15).
Switch off the control unit and deactivate the main fuse (see Page 15).
If necessary: Remove the legrests.
Tools: Allen wrench size 3
Removing the rear cover
1) Fold up the seat (see Page 16).
2) Remove the battery cover (see Page 17).
3) Loosen and remove the 2 screws in the rear cover (see Fig. 14, item 1).
4) Loosen the upper edge of the rear cover from the mounting clips on the frame and remove the rear cover panel
(see Fig. 155).
5) If necessary:
Installing the rear cover
1) If necessary:
2) If necessary: Fold down the seat (see Page 16).
3) Put on the rear cover and engage it on the mounting clips on the frame (see Fig. 15).
4)
5) Fold up the seat (see Page 16).
6) Attach the battery cover (see Page 17).
7) Fold down the seat (see Page 16).
14
16
490E75=0_C
15
Service work
Ottobock | 19