Replacing The Armrest; Replacing The Clothing Protector - Otto Bock B-Series Service Manual

4.16.3

Replacing the armrest

f Tools: Allen wrench size 3; torque wrench with Allen insert size 3
Removing the armrest
1) Optional: Remove the control panel with swivel arm (see Seite 24).
2) Pull the side panel up and out of the side panel holder. To do so, loosen the thumb screw on the side panel holder
(see Fig. 129/130, item 1).
3) Loosen the 2 set screws on the bottom of the armrest (see Fig. 131, item 1).
4) Slide the armrest down and off the side panel.
Attaching the armrest
1) Slide the armrest onto the side panel and into the desired position.
2) Firmly tighten the 2 set screws on the bottom of the armrest (see Fig. 131, item 1).
3) Slide the side panel into the side panel holder from above and firmly tighten the thumb screw on the side panel
holder (see Fig. 129/130, item 1).
4) Optional: Install the control panel with swivel arm (see Seite 24).
131
4.16.4

Replacing the clothing protector

f Tools: Allen wrench size 3; torque wrench with Allen insert size 3
Removing the clothing protector
1) Pull the side panel up and out of the side panel holder. To do so, loosen the thumb screw on the side panel holder
(see Fig. 129/130, item 1).
2) Loosen and remove the 2 screws on the clothing protector (see Fig. 132, item 1).
3) Remove the clothing protector from the side panel (see Fig. 132, item 2).
Attaching the clothing protector
1) Position the clothing protector on the side panel (see Fig. 132, item 2).
2) Insert the 2 screws into the clothing protector and firmly tighten them (see Fig. 132, item 1).
3) Slide the side panel into the side panel holder from above and firmly tighten the thumb screw on the side panel
holder (see Fig. 129/130, item 1).
132
B-Series
Service work
Ottobock | 67