Installing And Adjusting The Tray; Scope Of Delivery; Installation - Otto Bock 490E75 Series Service Manual

Service work
4.20

Installing and adjusting the tray

INFORMATION
The following information also applies when adjusting the tray of the centre tray control.
4.20.1

Scope of delivery

The product is delivered partly pre-assembled. The scope of delivery includes:
• 2 holders (already mounted on the power wheel chair if ordered):
– 1 holder is on the arm support on the side of the control panel (see fig. 28, item 1).
– 1 holder with quick clamp lever is on the oppos ite side (see fig. 28, item 2).
• Long clamping profile (already mounted on the power wheelchair if ordered)
• Swivel mechanism
269
4.20.2

Installation

CAUTION
Improper adjustment
Crushing or pinching due to adjustments which are too tight
Do not pinch the user when sliding in the product.
INFORMATION
The tray can only be ordered with a swing-away control panel holder. Swing the control panel to the side dur-
ing installation.
For better representation of the installation steps, the installation was photographed without the control panel.
Positioning and attaching the tray
1)
left).
2) Put on and align the tray top. In doing so, check to ensure the tray retainer is centred.
3)
4)
5)
124 | Ottobock 490E75=0_C