Chapter 3 Preparation and Inspection Before Use
3.1.2 Inspecting the Forceps Valve
(1) Visually check that the slit in the cap (a) and hole in
the main body (b) of the forceps valve are free from
abnormalities such as tears, cracks, discoloration, etc.
(2) Attach the lid to the main body of the forceps valve.
3.1.3 Attaching the Forceps Valve
(1) Attach the forceps valve to the instrument channel inlet of
the ultrasonic endoscope.
48
The forceps valve is intended for single use. If any abnormality is found, do not use the
product, and use a new disinfected (or sterilized) forceps valve.
a
b
Forceps valve (FOV-DV7)
202B1262871D