Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
3. After a terminal window opens, the session prompts a user to enter a Login (or username) and
Password. The Login is "ati"; the password is "ati7720115".
NOTICE: Users can also log into the console with a user-defined username and password that
can be set with a CAL/SET command
(Section 6.7—Communication Page
5. Type a console command from
send the command.
NOTICE: Commands are not case sensitive.
8.2 Console Commands
These console commands can be used to view the status, parameters, and adjust settings of the sensor.
Command
HELP
H
MAN
?
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
(Table
8.2) or through the Communications webpage
(comm.htm)).
Section 8.2—Console
Figure 8.2—PuTTY Terminal Window
Table 8.1—Commands
Operand(s)
Not Applicable
C-56
Commands, press the (enter) key to
Description
The help command reports a list of the
console commands and software version.
www.ati-ia.com