Model Type Identification - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Axia80
Document #9620-05-B-Axia80-02
2.1 Model Type Identification
The Axia80 sensor is available in three different model types (Axia80-MXX) that are identifiable by the
number of grooves on the outer housing. The MXX suffix signifies the full-scale torque measurement range.
For the calibration ranges of each model type, refer to
each model is summarized in the following table:
Model
Axia80-M8
Axia80-M20
Axia80-M50
Notes:
Identifying grooves are physical indentations in the sensor body(refer to
1.
provide users a quick visual method to differentiate the sensor models.
2. For calibration ranges, refer to
The X signifies the communication interface: NET, ECAT, RS422, or RS485.
3.
Figure 2.2—Identifying Grooves (Axia80-M8 shown as a reference)
Identifying
Groove
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Section 7.3—Calibration
Table 2.2—Axia Models
Part Number
-Axia80-M8
9105-X 3
-Axia80-M20
3
9105-X
-Axia80-M50
9105-X 3
Section 7.3—Calibration
B-10
Ranges. An overview of
Number of
1
Identifying Grooves
3
0
2
2.2). These grooves
Figure
Ranges.
www.ati-ia.com
Material
Aluminum
Stainless Steel