Console Interface Through Telnet; Setting Up A Console Interface Through Telnet - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
8. Console Interface Through Telnet
The Ethernet Axia sensor has a console interface that is available to a user through Telnet.
8.1 Setting Up a Console Interface Through Telnet
By using a console interface on the computer, a user can communicate with the sensor. Free Telnet console
software, such as PuTTY, is available online.
For instructions on setting up a console through Telnet like PuTTY, refer to the following procedure:
1. Open the serial console, for example: PuTTY. A window opens that allows a user to set the configuration
for the session.
2. Set the configuration:
a. Under Connection type: select the radio button for Telnet.
In the Host Name (or IP Address) field, enter "10.1.2.18".
b.
In the Port field, verify the default port is "23".
c.
d. Select Open.
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Figure 8.1—Set the Configuration
C-55
www.ati-ia.com