Operation; Led Self-Test Sequence - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02

5. Operation

For general operation information about the sensor, refer to the appropriate sensor manual in

5.1 LED Self-Test Sequence

The Ethernet Axia sensor has three LEDs: Sensor Status, Link/Activity, and Diag. When a user applies
power, the sensor completes a self-test, during which the LEDs under firmware control turn-on individually.
Sequence
Order
0
1
2
3
4
5
6
7
8
9
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Table 5.1—LED Self-Test Sequence
LED State
At power on, some transient activity may be seen for only a
All
Off
All
Status Red
Diag Red
L/A Red
Status Green
Diag Green
L/A Green
Off
All
All
Figure 5.1—LED Label on the Sensor
C-25
Table
Duration
few milliseconds.
Approximately one second
for each state.
Normal Operation
www.ati-ia.com
2.1.