Cgi Variable: Communications (Comm.cgi - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
9.5 CGI Variable: Communications (comm.cgi)
A user can set the networking options of the sensor (refer to
for more information).
Variable Name Allowed Values
comnetdhcp
Any IPV4 address
comnetip
Any IPV4 subnet
comnetmsk
decimal notation.
Any IPV4 address
comnetgw
comrdtbsiz Integers: 1 to 40
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Table 9.5—comm.cgi Variables
Description
Sets DHCP behavior.
Integers: 0 or 1
in dot-decimal Sets the static IP address to be used when DHCP is disabled.
notation.
mask in dot- Sets the subnet mask to be used when DHCP is disabled.
in dot-decimal Sets the gateway to be used when DHCP is disabled.
notation.
RDT Buffer Mode buffer size.
Section 6.7—Communication Page (comm.htm)
Value Description
0 Use DHCP if available on network
Use software-defined static IP values
1
C-74
www.ati-ia.com