Java Demo Application; Starting The Demo - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
®
7. Java Demo Application
The user can collect and view F/T data through the Java
version 6.0 (runtime 1.6.0) or later on the computer (download Java
7.1 Starting the Demo
Download the demo from the Demo page on the ATI Ethernet Axia F/T webpage:
1. Click the Download Demo Application button and follow the browser's instructions.
• The file ATINetFT.jar downloads. If the browser does not automatically run the downloaded file,
manually open the file on the computer.
NOTICE: The Java
enabled in the Ethernet F/T by default. For information on RDT settings, refer to
Communication Page
•
The demo program opens with the following window:
•
If the window does not appear, it may be hidden under the browser window. In this case, minimize the
browser window.
2. Type the IP address of the sensor.
•
On the Demo page, the IP address of the sensor is in the paragraph above the Download Demo
Application button.
3. Click OK.
• The Java
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Figure 7.1—Demo Page
® Demo requires the Ethernet F/T to have its RDT Interface enabled. RDT is
(comm.htm).
Figure 7.2—Ethernet IP Address Request
Demo application main window opens.
®
demo application on a personal computer. Install Java
®
®
from www.java.com/getjava).
C-48
®
Section 6.7—
www.ati-ia.com