Calibration Information (Netftcalapi.xml - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
11.2 Calibration Information (netftcalapi.xml)
The XML page netftcalapi.xml retrieves information about a specific calibration. Retrieved calibration
information has not been modified by any of the Ethernet Axia configuration settings.
A calibration index can be specified when requesting this calibration information. This is done by appending
?index=n to the request, where n is the index of the desired calibration. If a calibration index is not specified
the currently-used calibration will be assumed.
For example, to retrieve calibration information for the second calibration the requested page would be
netftcalapi.xml?index=1.
XML Element
calsn
calpn
caldt
calmtx
calfu
scalfu
caltu
scaltu
calmr
calcpf
calcpt
calrng
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Table 11.3—XML Elements in netftcalapi.xml
Data Type Calibration Information
STRING8 Serial number
STRING32 Calibration type
STRING20 Calibration date
REAL Matrix value
Force units (refer to config.cgi variable cfgfu for values)
USINT
STRING8 Name of force units
Torque units used (refer to config.cgi variable cfgtu for
USINT
values)
STRING8 Name of torque units
REAL[6] Calibrated sensing ranges in calfu and caltu units
DINT Counts per force unit
DINT Counts per torque unit
REAL Calibrated sensing range
C-80
www.ati-ia.com