Data Display With The Demo; Collecting Data With The Demo - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02

7.2 Data Display with the Demo

The main screen in
code. To understand how to interpret the status code, refer to
operation, the application requests single records, so the RDT sequence remains constant. For more
information about RDT protocol, refer to
A cube in the lower screen provides a real-time visual representation of the F/T data. The user can bias the
data and select the calibration configuration.
7.3 Collecting Data with the Demo
To collect F/T data, follow these steps:
1. On the Java
methods (refer to
• click the "..." button to the right of the file selection field and navigate to the file destination.
• directly type the file path into the file selection field.
2. Click the Start Collecting button(refer to
• The application sends out a request for high-speed data to the Ethernet Axia sensor.
• The user can see the RDT sequence incrementing in real-time because the application requests more
than a single record when in high-speed mode.
• The measurement data are stored in comma-separated value format (CSV) so it can be read by
spreadsheets and data-analysis programs.
3. Name the file with a .CSV extension.
4. Double-click on the file to open it.
NOTICE: If collecting large amounts of data, understand any limitations a spreadsheet or data
analysis program may have to accommodate a certain number of rows.
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
features a live display of the current F/T data, sequence numbers, and status
Figure 7.3
Section 12—UDP Interface Using
demo application main window, select a file to save the data by one of the following
®
Figure 7.5):
Section 5.5—Status
Figure 7.3):
C-50
Code. During normal
RDT.
www.ati-ia.com