Communication Page (Comm.htm - Novanta ATI Axia80 Manual

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
6.7 Communication Page (comm.htm)
On the Communication page, a user may view and edit the system's Ethernet networking options.
Usually these settings are set once when a user first setup the system and do not need to be changed later
A detailed overview of setting up Ethernet communications with the sensor is in
Through Ethernet.
The descriptions for the fields on the Communications page,
Ethernet Network Settings
IP Address Mode:
Static IP Address:
Static IP Subnet Mask: This field is for the subnet mask portion of the IP address. Many networks use the
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
Figure 6.8—Communications Page
A user can configure the IP address of the sensor (refer to
Configuration for
Ethernet).
A user can set the static IP address (refer to
Configuration for Ethernet).
default 255.255.255.0. Users should contact their IT department to know what static
IP subnet mask to assign.
C-42
Section 4—Connecting
Figure 6.8, are the following:
Section 4.1—IP Address
Section 4.1—IP Address
www.ati-ia.com