Disassembling The Screw Sleeve - Husqvarna FC 450 2014 Repair Manual

6
FORK, TRIPLE CLAMP
Disassemblin the screw sleeve
Info
The steps are identical for both fork legs.
-
Remove rebound washer
-
Remove compression piston@. Remove 0-ring
-
Remove compression shim stack@).
-
Remove 0-ring G'i).
Preparatory work
-
Disassemble the fork legs. (,... p. 16)
-
Disassemble the cartridge. (,... p. 19)
-
Disassemble the piston rod.(,... p. 21)
Main work
-
Remove 0-ring
-
Remove lock ring
200866-10
-
Screw the special tool onto the screw sleeve.
I
Threaded bushing (T14023) (,... p. 231)
✓ The special tool must have an overhang to protect the thread.
I Overhang
-
Pry out seal ring
200867-10
(D.
O.
8. 8.
Remove ring
11 mm (0.04 in)
C,,
being sure only to brace the lever against the special tool.
@).
23