Installing The Alternator Cover; Installing The Valve Cover; Installing The Spark Plug - Husqvarna FC 450 2014 Repair Manual

17 ENGINE
17.5.29

Installing the alternator cover

17.5.30

Installing the valve cover

17.5.31

Installing the spark plug

-
Raise rocker arm
-
Remove shims
-
Correct the shims according to the findings from checking the valve clearance.
-
Insert suitab le shims.
-
Install the camsha ft.(
-
Install the timing chain tensioner.(,... p. 181)
-
Check the valve clearance. (
-
Mount locating pins
-
Position alternator cover gasket
-
Position the alternator cover.
-
Mount screw
Guideline
I
Screw, alternator cover
-
Mount screws
Guideline
I
Screw, alternator cover
-
Position the valve cover seal.
-
Position the valve cover.
-
Mount and tighten screws
Guideline
I
Screw, valve cover
-
Mount and tighten the spark plug using the special tool.
Guideline
Spark plug
I
Spark plug wrench (77229172000) (
308929-10
O
on the outside.
8
and set down in the position in which they were installed.
p. 181)
,...
p. 182)
,...
O.
8.
fD
with washer b ut do not tighten it yet.
I
C,
and tighten all screws in a crisscross pattern.
I
O.
p. 225)
,...
M6x25 10 Nm (7.4 lbf ft)
M6x25 I10Nm(7.41bfft)
I 10Nm(7.41bfft)
M12x1.25 15 ... 20 Nm
(11 .1 ... 14.8 lbf ft)
183