Changing The Pilot Bushing - Husqvarna FC 450 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.17
Chan
-
Remove centering disk
-
Remove seal ring
201406-10
-
Remove washer
-
Remove washer @.
-
Remove dust boot.
201407-10
ilot bushin
Preparatory work
-
Remove the spring. (
-
Disassemble the damper. (
-
Disassemble the piston rod. (
-
Disassemble the seal ring retainer. (
Main work
-
Press pilot bushing
I
Press drift (T1504) (
-
Slide the new pilot bushing
I
Press drift (T1504) (
Position the pilot bushing in the seal ring retainer using the special tool.
I
Press drift (T1504) (
-
Support seal ring retainer
bushing all the way in.
I
Assembly tool (T150S) (
-
Lubricate the special tool.
Shock absorber fluid (SAE 2.5) (50180751 S1) (
Calibration pin (T1205) (
-
Support seal ring retainer
I
Assembly tool (T150S) (
-
Press the special tool through the new pilot bushing.
I
Calibration pin (T1205) (
200798-10
✓ The pilot bushing is calibrated.
Finishing work
-
Assemble the seal ring retainer. (
8.
0.
0.
(D
for seal ring
p. 54)
,r-
,r- p. 54)
p. 55)
,r-
,r- p. 56)
O
out of seal ring retainer
,r- p. 232)
O
onto the special tool.
,r- p. 232)
p. 232)
,r-
8
with sleeve f) of the special tool. Press the pilot
,r- p. 232)
p. 228)
,r-
8
with sleeve f) of the special tool.
,r- p. 232)
p. 228)
,r-
p. 60)
,r-
8
with the special tool.
p. 216)
,r-
57