Greasing The Steering Head Bearing; Removing The Lower Triple Clamp - Husqvarna FC 450 2014 Repair Manual

6
FORK, TRIPLE CLAMP
6.28

Greasing the steering head bearing

re
�
! � >
a
6.29
Removin the lower tri
-
Remove the lower triple clamp. (- p. 37)
-
Install the lower triple clamp. (- p. 38)
800010-10
Preparatory work
-
Raise the motorcycle with a lift stand. (- p. 10)
-
Remove the front wheel. (- p. 92)
-
Remove the fork legs. (- p. 14)
-
Remove the start number plate. (- p. 88)
-
Remove the front fender. (- p. 88)
Main work
-
Take cable holder
off
-
Remove screw
-
Remove screw
-
Take the top triple clamp with the handlebar and set it aside.
off
• Info
I
Protect the components against damage by covering them.
Do not bend the cables and lines.
-
Remove O-ring
-
Take out the lower triple clamp with the steering stem.
-
Take out the upper steering head bearing.
O
in front of the left radiator.
8.
8.
e.
Remove protective ring
0.
37