Changing The Fuel Screen - Husqvarna FC 450 2014 Repair Manual

12
FUEL TANK, SEAT, TRIM
m 12.12

Changing the fuel screen

Danger
Fuel is highly flammable.
Fire hazard
-
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
-
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
A
Warning
Danger of poisoning
-
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
Warning
Environmental hazard
-
Do not allow fuel to get into the ground water, the ground, or the sewage system.
-
Position the fuel pump.
-
Mount fuel connection fj with the gasket but do not tighten yet.
-
Mount and tighten nut
Guideline
I
Nut, fuel pump fastener
-
Tighten fuel connection fj.
Guideline
I
Fuel connection on fuel tank
-
Mount and tighten screws (5).
Guideline
I
Screw, fuel pump
Finishing work
-
Install the fuel tank. (- p. 80)
-
Mount the seat. (- p. 79)
Fuel is poisonous and a health hazard.
Improper handling of fuel is a danger to the environment.
-
Clean plug-in connection
• Info
I
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve!
-
Disconnect the plug-in connection of the fuel line.
• Info
I
Remaining fuel may flow out of the fuel hose.
-
Pull fuel screen fj out of the connecting piece.
-
Insert the new fuel screen all the way into the connecting piece.
-
Lubricate the O-ring and connect plug-in connection of the fuel line.
O
with the gasket.
I
M12x1.75
I
M8x1 .25
I
EJOT
O
of the fuel line thoroughly with compressed air.
86
15 Nm (11.1 lbf ft)
110 Nm (7.4 lbf ft)
I 3 Nm (2.2 lbf ft)